歡迎訪問溫州市旭日印刷機械有限公司官網!

搜索
您當前所在位置:網站首頁 > 新聞中心 > 最新動態
溫州市旭日印刷機械有限公司前身是溫州市南方包裝機械廠,坐落在溫州梧埏工業基地,距火車站僅2公里,交通便捷

YYJ-480型液壓書背壓緊機使用說明

發布時間:2019-10-31

瀏覽次數:1226

  使用壓緊機之前,請先對壓緊機的結構原理進行了解。并請按照以下操作規程順序進行操作。
  Before operation, first understand the structure principle of the compacting machine and carry out the operation according to the following operation procedure.
  檢查電機給電是否正確,檢查油箱油位情況,如不足應加足。油泵電機方向以箭頭方向為準。
  Check whether the motor switches correctly, check the oil box position in full and oil pump motor direction bases as the arrow direction.
  檢查推壓板(中間)的潤滑度,如不足應加足,使之充分潤滑。
  Check the push plate (middle) lubrication degree in full.
  啟動電源開關后液壓系統工作,將書脊朝下放入。碰踏開關,推壓板向前擠壓。一定時間后自動退回到原位以備下次擠壓。擠壓時間可由時間繼電器調節。
  Start the power switch, place the book spine downwards. Pedal the switch, the push plate extrudes forwards. After a certain time, it will automatically return the original position so as to prepare the next extrusion.
新聞詳情